If you think that you will just sit back and relax when you have a CNC machine in your shop, reconsider. CNC may help you speed up your own operations and even make them more effective. However, CNC is not a “wonder robot” which will make you disregard all your workers and expect your shop to run on auto-pilot.

Though you will require more people without the CNC technology, you will need only three very, really skilled people. Call these folks your friends, your team, what ever. In the long run, they might be just all that you should keep the shop in good shape.

The actual PROGRAMMER

The first person is the CNC programmer. S/he is like the “playmaker”.  S/he will create the programs that the CNC machines are intended to execute. Since the programs have been in the form of CNC codes fabricated like sentences, he should have mastered these codes because they work like a different language. The regular CNC machine can use up to 50 codes, so that’s like learning 50 new words for the newbie.

Also, the programmer must have at least and engineering or even machining degree. Remember that the CNC machine will only execute WHAT IT IS PROGRAMMED TO DO. If the program is wrong, the whole operation goes down the actual drain with it. Moreover,s/he should also be flexible and have a fast turn-around because a CNC machine is often used to machine a huge selection of different work-pieces.

THE Owner

The second person that you need may be the CNC operator. S/he will simply recheck the applications loaded to the machine as well as push the right buttons to get the work done. However, thinking that a CNC operator can have little or NO SKILL AT ALL is incorrect. A CNC machine operator must have a minimum of basic machining skills and s/he should have undergone some form of training to run a CNC machine.

These machines can produce very intricate motions, making it possible to make shapes that cannot end up being created on conventional machine tools. So, the operator should foresee this intricacy and know how to cruise by using it. The skills that an operator should have though, are lesser compared to the operators of conventional machine tools.

THE TECHNICIAN

The 3rd person that will need is the CNC technician. Even though this may still be the programmer, it’s more convenient to always have a technical expert on-call because in the long run, you might have more than one CNC machine and you may need to focus on over the other in case both gets crippled at the same time. Similar to the programmer, the technician also needs to be flexible and state. CNC offers a lot of complexity when it’s running right, how much more if it’s behaving badly?

So, if you are having job openings with regard to positions that need to be coping with CNC machine, ask the applicants first to do a demo for you and make sure that during the demo, they know what they’re doing. A test may also do wonders as well. If they have no experience with any type of CNC machine, it is advisable that you encourage them to take short courses on CNC.

Eighty-hour is available online and hey, it’s an improvement on nothing.  Experts even encourage employers to employ CNC machinists who have finished AND Handed the National Occupational Competency Screening Institute (NOCTI) assessment just so they may be sure that their CNC machines goes to good hands. After all, a CNC machine is still an asset. Find out more upon http://cncrouterinfo.com/.